| Parameter |
Specifications |
| Memory size |
32k gives a total of 32000 samples per use. Or 16000 Temperature and 16000 Humidity. |
| Sample period |
Programmable between 2 seconds and 36 hours in 2 second increments |
| Start delay |
Programmable between 2 seconds and 36 hours or use the start on date and time function |
| Start and Stop |
Start / Stop button on logger or use the software and reader interface to start the logger |
Recording duration
(memory full) |
From 16 hours with a 2 second sample period set, to 2 years with a 36 hour sample period set |
| Temperature range |
-40°C to +75°C ~ -40°F to +167°F |
| Temperature accuracy |
+/-0.2°C ~ +/-0.36°F over the range -20°C to +50°C ~ -4°F to +122°F otherwise 0.5°C / 0.9°F |
| Humidity range |
0.00% to 100% RH |
| Humidity sensor accuracy |
3% RH between 12 to 85% RH, otherwise 5% RH between 0.00 to 12% and 85 to 100% RH |
| Inside range indicator |
One flash from Green LED every ten seconds |
| Outside range indicator |
One flash from Red LED every ten seconds |
| Display resolution |
0.01°C ~ 0.01°F |
| Firmware version |
2.12 |
| Battery type |
Lithium Thionyl Chloride |
| Dimensions weight and colour |
129 x 73.5 x 14mm 83 grams ~ 5 1/8 x 2 7/8 x 5/8 inches 2.92 oz ~ Beige |
| Case protection rating |
Splash proof to IP64 protection rating. IP64 protection rating applies to the portion of the case that houses the electronics and battery, not the RH sensor itself. If the sensor has been exposed to water spray or jets of water you must dry the RH sensor using the procedure described in the Temprecord user manual to return the RH sensor back to factory calibration conditions. |
| Warranty Period |
12 months on logger from date of purchase ~ 2 years on battery |
© Temprecord International Ltd |
